Electrostatic Droplet Growth in a Neutrally Buoyant Emulsion

Droplet growth is examined in a water-in-oil type emulsion where the droplets are subjected exclusively to viscous and dielectrophoretic forces. The latter are produced by the interaction of the droplets with an otherwise uniformly imposed electric field. Theoretical considerations are presented as a basis for understanding and interpreting the experiments. An emulsion consisting of deionized water droplets in a silicone oil of specific gravity I is subjected to a uniform 60 Hz, ac electrostatic field. Initially, the droplets are fairly monodisperse with mean diameters of approximately 25 , sm. The changes in droplet size distributions with time are examined with a laser diffraction system for water volume fractions ranging from 0.001 to 0.1 and applied fields ranging from 52 to 520 kVm-1. The average droplet size increases exponentially with time; we examine the exponent's dependence on average field strength and droplet volume fraction.     

Laser coupling to single-mode fibre using graded-index lenses and compact disc 1.3 ?m laser package

A 1.3 ?m laser in a compact disc package is coupled to single-mode fibre using two graded-index lenses in a nearly confocal scheme. An increase in the alignment tolerance at the lens-lens interface by a factor of six suggests the design for a potentially very low-cost connectorised laser package. The coupling efficiency of approx. 6% (?12 dB) is shown to be adequate for local loop applications.     

Location of structural sections from within a highly distorted complex line drawing

Complex and highly distorted line drawings are produced by subjects attempting the Rey Complex Figure test, a clinical test of neuropsychological assessment. However, the marking scheme conventionally employed can be subjective and unreliable. In this paper, the first stages in automating this scoring system are investigated using a robust technique to locate a reduced set of scoring sections and a knowledge-based system that employs spatial metrics and fuzzy approximation techniques. Testing the technique using clinical data produced encouraging results that support the argument that this is a feasible approach for implementing a fully automated system, and that in its current state, can be immediately applied in a semi-automated system.     

Use of rheology, dielectric analysis and differential scanning calorimetry for gel time determination of a thermoset

Measurements of gel time of the epoxy system DGEBA(n=0)/m-XDA were carried out using rheometry and dielectric analysis with the objective of checking the validity of Mangion-Johari equation (DEA) and Harran-Laudouard criterium (rheometry) for gel time determination. In this work, gel times obtained by rheometry and dielectric analysis are compared and conversions at gel time calculated. From the experimental results obtained for gel times it was found a reasonable agreement between the two techniques that lead to gel conversion values very close to those obtained using Flory equation.     

Nucleation of solidification in liquid droplets

Analytical and numerical methods have been developed to analyze the solidification kinetics of a mass of liquid droplets dispersed in a fluid or solid matrix using classical nucleation theory. The resulting analytical expressions and numerical calculations can be compared directly with calorimetric measurements of the droplet solidification exotherms to obtain information about the nucleation mechanism. With increasing contact angle at the solid-liquid-matrix triple point, the solidification onset, peak, and end temperatures and exothermic peak height all decrease sharply and the droplet solidification exotherms become broader. Decreasing either the droplet radius or the number of potential catalytic nucleation sites produces a similar but smaller effect. Distributions in droplet radius, contact angle, and nucleation sites have no effect on the solidification peak temperature, but the droplet solidification exotherms become broader and more symmetric. The solidification onset temperature is independent of cooling rate in the calorimeter, but the solidification peak and end temperatures decrease and the exothermic peak height increases with increasing cooling rate. Predicted droplet solidification exotherms are in excellent agreement with detailed experimental measurements on 10-nm-radius Cd droplets embedded in a solid Al matrix. Analytical predictions give best-fit values of 43 deg and 430 for the contact angle and the number of potential catalytic nucleation sites per droplet, respectively; numerical predictions give best-fit values of 43 deg and 750 for the contact angle and the number of potential catalytic nucleation sites per droplet, respectively.     

Towards real CAD

Present-day computer-aided design (CAD) packages play only a small part in the area of mechanical engineering design, which involves the synthesis and embodiment of physical components to perform a pre-determined function without unwanted side effects. The computer cannot properly help the designer in this task until it is able to capture and process the function requirements of the design. This paper describes the computer system being developed for this purpose at the Engineering Design Centre at Cambridge University Engineering Department. The paper also explores some of the geometrical and programming implications raised.     

Architecture and algorithms for tracking football players with multiple cameras

A system architecture and method for tracking people is presented for a sports application. The system input is video data from static cameras with overlapping fields-of-view at a football stadium. The output is the real-world, real-time positions of football players during a match. The system comprises two processing stages, operating on data from first a single camera and then multiple cameras. The organisation of processing is designed to achieve sufficient synchronisation between cameras, using a request-response pattern, invoked by the second stage multi-camera tracker. The single-view processing includes change detection against an adaptive background and image-plane tracking to improve the reliability of measurements of occluded players. The multiview process uses Kalman trackers to model the player position and velocity, to which the multiple measurements input from the single-view stage are associated. Results are demonstrated on real data.     

Crystal growth of selected II–VI semiconducting alloys by directional solidification: Part I Ground-based experiments

A series of Hg_0.84Zn_0.16 Te crystal ingots have been grown from pseudobinary melts by the Bridgmam–Stockbarger type directional solidification using a Marshall Space Flight Center/Space Science Laboratory heat-pipe furnace and the ground control experiment laboratory furnace of the crystal growth furnace which was flown on the first United States Microgravity Mission. A number of translation rates and a series of hot- and cold-zone temperatures were employed to assess the influence of growth parameters on the crystal properties for the purpose of optimizing the in-flight growth conditions. This revised version was published online in November 2006 with corrections to the Cover Date.